Dry Treadmill

 

Hippocentre ProTrainer Dry Treadmill 
  • Galvanised corrosion protected treadmill unit
  • Soft floor – extra layer for concussion prevention
  • Length 3.7m (6.5m including ramps); width 1.6m; height 2.42m; weight 1.2T
  • Continuous speed regulator from 0 to 12 km/h
  • Elevation up to 10%
  • Main electric box with separate user control panel
  • 10 pre-set programmes for training, recovery, strengthening and fitness
  • 100 customised programmes available
  • Emergency stop
  • Safety photocell (anti panic)
  • Lubrication system
  • Main electric power supply 400V, 16amp (three-phase). Single-phase 230V 32A
  • 300mA set up available with surcharge.
  
TrainerPro SS Equine Treadmill 
  • Stainless steel treadmill unit with transparent sides
  • Length 3.7m (6.5m with ramps); width 1.46m; height 1.9m; weight 1250kg.
  • Continuous speed regulator from 0 to 10 km/h (4.5kw motor)
  • 6 degree elevation up
  • Optional extra: 3 degree elevation down (Note: the treadmill floor is 350mm higher than shown in diagram below with this feature)
  • Main electric box with separate user control panel
  • 10 pre-set programmes for training, recovery, strengthening and fitness
  • Emergency stop
  • Safety photocell (anti panic)
  • Cross ties
  • Front and rear bars
  • Lubrication system
  • Main electric power supply 380-414V but treadmills can also operate on other power such as 240V, 32amp single-phase.

 

preload spinner